Product Overview
The Allen-Bradley 1785-TR10BT is a 10Base-T twisted-pair transceiver (media access unit) that converts a 15-pin AUI Ethernet port into an RJ-45 twisted-pair connection. It is used with Series E PLC-5/E processors, the 1785-ENET Ethernet sidecar, and 1761-NET-ENI adapters — all of which expose AUI rather than RJ-45 — so that these controllers can be connected to a standard Cat 5 or better UTP segment and a modern Ethernet switch. It operates at 10 Mbps only.
Key Specifications
- Manufacturer: Allen-Bradley (Rockwell Automation)
- Model / Part Number: 1785-TR10BT
- Product Type: 10Base-T Twisted-Pair Transceiver (AUI-to-UTP media access unit)
- Host Interface: 15-pin AUI (Attachment Unit Interface)
- Network Interface: RJ-45, unshielded twisted pair
- Data Rate: 10 Mbps
- Standard: IEEE 802.3 10Base-T (no auto-negotiation to 100 Mbps)
- Cable Type: Cat 5 or better UTP
- Max UTP Segment: 100 m (10Base-T standard)
- Max AUI Cable: 50 m (cumulative, including transceiver drop)
- Power Source: AUI power-sourcing pins or external 5 V DC adapter, depending on the host device
- Indication: Link and data activity LEDs
- SQE Test: Heartbeat (SQE) test supported
Key Features
- AUI-to-UTP Conversion: The practical way to put an AUI-only PLC-5/E processor or 1785-ENET sidecar onto a modern twisted-pair switch.
- 10Base-T Compliance: Standard 10 Mbps CSMA/CD operation on Cat 5 UTP up to 100 m.
- AUI or External Powering: Draws power from the AUI power-sourcing pins where the host supports it, or from an external 5 V DC adapter otherwise.
- Status LEDs: Link and activity indication speeds up troubleshooting at the cabinet.
- Direct Plug-In or AUI Drop Cable: Mounts directly on the device’s AUI connector or on a short AUI cable segment.
- Mixes with Other 1785 Media Units: Same family as the 1785-TR10B5 (10BASE5), 1785-TR10B2 (10BASE2) and 1785-TR10BF (10BASE-FL) transceivers for other legacy media.
Typical Applications
- Connecting Series E PLC-5/40E and PLC-5/80E processors to an Ethernet switch over UTP
- Putting a 1785-ENET sidecar onto a plant Ethernet backbone
- 1761-NET-ENI installations where an AUI port must reach a twisted-pair segment

Descripción general del producto
El Allen-Bradley 1785-TR10BT es un transceptor (unidad de acceso al medio) 10Base-T de par trenzado que convierte un puerto Ethernet AUI de 15 pines en una conexión de par trenzado RJ-45. Se utiliza con procesadores Series E PLC-5/E, el módulo sidecar Ethernet 1785-ENET y adaptadores 1761-NET-ENI — todos ellos con puerto AUI en lugar de RJ-45 — para poder conectarlos a un segmento UTP Cat 5 o superior y a un switch Ethernet moderno. Opera únicamente a 10 Mbps.
Especificaciones clave
- Fabricante: Allen-Bradley (Rockwell Automation)
- Modelo / Número de parte: 1785-TR10BT
- Tipo de producto: Transceptor 10Base-T de par trenzado (unidad de acceso al medio AUI a UTP)
- Interfaz del host: AUI de 15 pines (Attachment Unit Interface)
- Interfaz de red: RJ-45, par trenzado sin apantallar
- Velocidad de datos: 10 Mbps
- Norma: IEEE 802.3 10Base-T (sin autonegociación a 100 Mbps)
- Tipo de cable: UTP Cat 5 o superior
- Segmento UTP máximo: 100 m (norma 10Base-T)
- Cable AUI máximo: 50 m (acumulado, incluida la derivación del transceptor)
- Alimentación: pines de alimentación del AUI o adaptador externo de 5 V CC, según el dispositivo host
- Indicación: LEDs de enlace y actividad de datos
- Prueba SQE: Prueba de heartbeat (SQE) soportada
Características principales
- Conversión AUI a UTP: La solución práctica para incorporar un procesador PLC-5/E con solo AUI o un sidecar 1785-ENET a un switch de par trenzado moderno.
- Cumplimiento 10Base-T: Operación CSMA/CD estándar a 10 Mbps sobre UTP Cat 5 hasta 100 m.
- Alimentación por AUI o externa: Toma alimentación de los pines de alimentación del AUI cuando el host lo soporta, o de un adaptador externo de 5 V CC en caso contrario.
- LEDs de estado: Indicación de enlace y actividad que agiliza el diagnóstico en el gabinete.
- Conexión directa o con cable AUI: Se monta directamente en el conector AUI del dispositivo o en un tramo corto de cable AUI.
- Compatible con otras unidades de medio 1785: Misma familia que los transceptores 1785-TR10B5 (10BASE5), 1785-TR10B2 (10BASE2) y 1785-TR10BF (10BASE-FL) para otros medios heredados.
Aplicaciones típicas
- Conexión de procesadores Series E PLC-5/40E y PLC-5/80E a un switch Ethernet sobre UTP
- Incorporación de un sidecar 1785-ENET a la red Ethernet de planta
- Instalaciones 1761-NET-ENI en las que un puerto AUI debe alcanzar un segmento de par trenzado














There are no reviews yet.