ABB PFSK152 Signal Concentrator Board
Product Overview
The ABB PFSK152 is a signal concentrator board in the ABB Stressometer flatness measurement system, supplied under ordering code 3BSE018877R1 and also catalogued as R2. It gathers the measurement and encoder signals arriving from the mill side of the Stressometer cabinet and passes them downstream to the DSP-UP processing assembly. Opto-isolation separates the incoming signal paths from the cabinet electronics, and an LED marked “24 EXT-OK” on the board reports whether the external 24 V supply is present.
Key Specifications
- Manufacturer: ABB
- Type Designation: PFSK152
- Ordering Code: 3BSE018877R1 (R2 also catalogued)
- Product Type: Signal concentrator board
- System: ABB Stressometer flatness measurement system
- Function: Concentration and transfer of measurement and encoder signals into the processing chain
- Downstream Unit: DSP-UP (PLD 1.0/1) sub-assembly
- Signal Isolation: Opto-isolation on the incoming signal paths
- Supply Monitoring: External 24 V DC, indicator LED “24 EXT-OK” on the board
- Form: Board-level assembly, fitted inside the Stressometer cabinet
- Condition: New surplus and original units available
- Packaging: Anti-static protection
Key Features
- Signal Concentration Inside the Cabinet: The measurement and encoder signals are collected at one board before they reach the processing electronics, which keeps the cabinet wiring to a single defined path.
- Opto-Isolated Inputs: The incoming signal paths are optically isolated from the cabinet electronics, separating the mill-side signals from the measurement electronics.
- DSP-UP Interface: The board is designed to connect the DSP-UP (PLD 1.0/1) sub-assembly, providing the route by which the concentrated signals enter the processing chain.
- External 24 V Monitoring: The “24 EXT-OK” LED on the board shows at a glance whether the external 24 V feed has reached the card, which makes supply checks a matter of reading the front of the board.
- Board-Level Replacement: A fault in the signal concentration stage is cleared by exchanging the complete board, without component-level repair.
Typical Applications
- Flatness measurement stations on cold rolling mills and foil mills
- Signal entry point inside the Stressometer measuring cabinet
- Concentration of encoder and sensor signals ahead of the DSP stage
- Board replacement and spare stocking on Stressometer systems in service













There are no reviews yet.