Call us 24/7+86 18250705533

ABB PU515A Real Time Accelerator PCI Board

In stock

ABB PU515A Real-Time Accelerator PCI Board is a 33 MHz PCI real-time accelerator board (3BSE032401R1) for ABB Master and MOD eDCN systems, combining a 25 MHz processor, 16 MB RAM, and a dual-channel MB300 communication module with two 15-pin D-sub connectors for control network communication.

SKU: 6125637-1-1-1-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1
wechatPhone +8618250705533
Phone: +86 18250705533
Email: sales5@xrjdcs.com
connect:Jinny
Image 2

ABB PU515A Real-Time Accelerator PCI Board is a real-time accelerator (RTA) board for ABB Master and MOD eDCN control systems, carrying a dual-channel MB300 communication module and 16 MB of RAM on a 33 MHz PCI bus interface. With a 25 MHz processor, it offloads real-time communication processing from the control station and connects to the MasterBus 300 network through two 15-pin female D-sub connectors. It is used in Advant OCS and 800xA for Advant Master / MOD 300 installations.

Product Datasheet

  • Brand: ABB
  • Model: PU515A
  • Ordering Code: 3BSE032401R1
  • Series: Advant OCS (Master / MOD 300), 800xA
  • Product Name: Real-Time Accelerator (RTA) Board
  • Processor: 1 processor, 25 MHz CPU clock frequency
  • Memory: 16 MB
  • Communication: Dual-channel MB300 via CS503V1 communication module, up to 10,000 kbit/s
  • Connectors: 2 × 15-pin female D-sub
  • Bus Interface: 3.3V or 5V 32-bit 33 MHz PCI, or 100/133 MHz PCI-X (runs at 33 MHz); also fits a 64-bit slot
  • Net Weight: 0.4 kg
  • Country of Origin: Sweden / Poland

Fault Troubleshooting and Common Questions

  1. The board is not recognized by the station. Check the PCI/PCI-X slot type and seating, the station’s BIOS/hardware inventory, and system power. Verify the ordering code and hardware revision are supported by the installed system software.
  2. MB300 communication cannot be established. Check both 15-pin D-sub connections, the MB300 cabling and termination, and the network address settings. Verify the dual-channel module is correctly configured for the system.
  3. Communication is intermittent or the error rate is high. Inspect the D-sub connectors and cabling for loose or damaged contacts, verify grounding and shielding, and check for address conflicts or network loading issues on MasterBus 300.
  4. Can the PU515A replace another RTA board? Not without verification. Compare the ordering code (PU515A 3BSE032401R1 vs PU515 3BSE013063R1, PU514A, PU516), memory and channel configuration, slot type, and software compatibility before replacement.

Safety Precautions

  • Isolate power and follow lockout/tagout procedures before removing or installing the board.
  • Use electrostatic discharge protection when handling the board and its connectors.
  • Verify slot type and power requirements before inserting the board.
  • Do not connect network cables until the electrical ratings have been confirmed.
  • Use qualified personnel for troubleshooting and maintenance in operating control systems.

Frequently Asked Questions

Q1: What is the ABB PU515A? It is a Real-Time Accelerator (RTA) board (ordering code 3BSE032401R1) with dual-channel MB300 communication and 16 MB of RAM, used in ABB Master and MOD eDCN control systems.

Q2: Which systems use the board? It is used in Advant OCS with Master software (800xA for Advant Master), Advant OCS with MOD 300 software (800xA for MOD 300), and Advant Station 500 series engineering stations.

Q3: What bus interface does it use? It installs in a 3.3V or 5V 32-bit 33 MHz PCI slot or a 100/133 MHz PCI-X slot (running at 33 MHz), and can also be installed in a 64-bit slot.

Q4: What should be checked before purchase? Verify the model label, ordering code 3BSE032401R1, hardware revision, condition, connector condition, and compatibility with the installed system and software.

ABB PU515A Real Time Accelerator PCI Board ABB PU515A Real Time Accelerator PCI Board ABB PU515A Real Time Accelerator PCI Board




    Customers reviews

    There are no reviews yet.

    Be the first to review “ABB PU515A Real Time Accelerator PCI Board”

    لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *

    Search for products

    Back to Top
    Product has been added to your cart
    phone: +86 18250705533
    to whats
    +8618250705533
    to whats
    +8618250705533
    email: sales5@xrjdcs.com