Product Overview
The Eaton APR24 is a 24 V DC access power rectifier built as a 3U Eurocard plug-in module. It converts a 240 V AC single-phase supply into a regulated 24 V DC output of up to 750 W (31 A), and it is designed to sit in a rectifier shelf alongside a supervisory module that handles battery charging and load sharing. The front carries three status LEDs, cooling is by a temperature-controlled fan, and the DC output is adjustable across the 21.5–29 V window needed for 24 V battery strings.
Key Specifications
- Manufacturer: Eaton
- Model: APR24
- Product Type: Access power rectifier, 24 V DC
- Nominal AC Input: 240 V
- Rated AC Operating Range: 185–275 V rms, full output up to 50 °C
- Extended AC Range: 150–185 V rms, full output up to 30 °C; 90–300 V rms with reduced output below 150 V
- Frequency Range: 45–66 Hz
- Maximum Input Current: 6 A rms (150 V AC, 20 °C)
- Efficiency: 88 % typical (50–100 % load, 230 V AC)
- Power Factor: >0.99 (50–100 % load)
- THD: <5 % (50–100 % load, rated AC voltage)
- Nominal DC Output: 24 V
- Adjustable Output Range: 21.5–29 V
- Rated Output Power: 750 W
- Rated Output Current: 31 A at 24 V
- Preset Output Voltage: 27 V ± 0.1 V (manufacturer preset)
- Regulation: ±0.1 V
- Hold-up Time: 7 ms
- Ripple: <10 mV rms (<100 Hz)
- Noise, Wideband: <10 mV rms (5 Hz–1 MHz)
- Noise, Peak-to-Peak: <200 mV p-p (0–20 kHz)
- Current Limit: Factory set to 31 A
- Over-Voltage Shutdown: <3 ms delay
- Short-Circuit Protection: Output limited to <130 % of rated current, self-recovering
- Polarity Reversal: Crowbar diode and fuse in the negative output
- Operating Temperature: -10 °C to +50 °C rated; -40 °C to +70 °C extended with derating
- Humidity: <95 % RH, non-condensing
- Altitude: <2000 m
- Dimensions (H × W × D): 3U (133 mm) × 13E (66 mm) × 257 mm
- Weight: 1.9 kg
- Connector: H16 Eurocard male
- Cooling: Temperature-controlled high-reliability fan
- Front LEDs: Green (power on), amber (non-urgent alarm), red (urgent alarm)
Key Features
- 750 W in a 3U Card: A full 31 A at 24 V from a single Eurocard module, so a shelf builds capacity by adding rectifiers rather than sizing one large unit.
- Wide AC Window: Holds full output from 185 to 275 V rms, and keeps running down to 150 V rms at 30 °C — useful where the AC supply is weak or heavily loaded.
- Battery-Ready Output Range: 21.5–29 V adjustment covers 24 V lead-acid strings, with the output preset at 27 V from the factory.
- Supervisory Module Control: Constant-voltage operation with automatic voltage control enabled from the rack supervisory module, and a fail-safe fallback to the preset voltage if system communication is lost.
- Layered Protection: Current limit, over-temperature turndown, over-voltage shutdown within 3 ms, crowbar and fuse on the negative output, and full short-circuit protection that recovers automatically.
- Front Status Indication: Green, amber and red LEDs report power on, current-limit (non-urgent) alarm and urgent alarm directly at the module face.
- Eurocard Connector: H16 male connector plugs into the shelf backplane for input, output and alarms.
Typical Applications
- Telecom access networks and remote sites running 24 V DC plants
- Cellular base stations and radio trunk installations
- SCADA and telemetry stations with 24 V battery backup
- Light industrial DC power systems built on 3U rectifier shelves
- Capacity expansion or replacement of a failed rectifier in an existing shelf













There are no reviews yet.