🔷Product Overview
The GE IC698PSA100E is the 100 W power supply module for the PACSystems RX7i controller, providing +5 V, +12 V, and -12 V rails to the RX7i VME backplane. It plugs into slot 0 of the RX7i main rack, operates from 85–264 VAC (or 100–150 VDC) input, and delivers full 100 W output from 0 to 60°C with only convection cooling. With electronic overcurrent, overvoltage, and overtemperature protection plus power factor correction, it is the standard supply for installed RX7i racks.
🔷Key Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE |
| Model / Part Number | IC698PSA100E |
| Product Family | PACSystems RX7i |
| Product Type | Power Supply Module (low capacity, 100 W) |
| Input Voltage | 85–264 VAC, 47–63 Hz; 100–150 VDC |
| Total Output | 100 W |
| +5 VDC Output | Up to 20 A |
| +12 VDC Output | Up to 2 A |
| -12 VDC Output | Up to 1 A |
| Cooling | Convection only (no forced air required) at 0–60°C |
| Protection | Electronic short-circuit/overcurrent limit, overvoltage latch (15% threshold), overtemperature shutdown |
| Hold-Up | Rides through loss of up to one AC input line cycle |
| ACFAIL# Signal | Asserted at least 5 ms before outputs fall out of specification |
| Fuses | 4 A / 250 V (B and later revisions use 5 × 20 mm fuses) |
| Connector | PICMG 2.11 standard, plug-in to slot 0 |
| Front Panel | FIELD OK and OUTPUT OK LEDs; logic-level ON/OFF switch (outputs only) |
| Field Wiring | AWG #16 copper, 75°C rated; terminals accept up to AWG #12 |
| Power Factor Correction | Yes (AC operation) |
🔷Key Features
- Three Regulated Outputs: +5 V/20 A, +12 V/2 A, -12 V/1 A from a single 100 W supply.
- Convection-Cooled at Full Rating: Delivers full 100 W at 0–60°C without a fan tray.
- Comprehensive Protection: Electronic current limiting per output, overvoltage latch-off, and automatic-recovery overtemperature shutdown.
- AC Line Ride-Through: Maintains output through one lost AC cycle; ACFAIL# warns the system 5 ms before output loss.
- Power Factor Correction: Meets AC power quality requirements.
🔷Typical Applications
- RX7i controller racks in process and factory automation
- Powering RX7i CPU and I/O modules from 120/240 VAC or 125 VDC plant supplies
- Spare-part supply for installed GE Fanuc PACSystems RX7i systems













There are no reviews yet.