HIMA F7133 4 Channel Fused Power Distribution Module 24VDC

🔨Overview

The HIMA F7133 is a DC/DC converter power supply module that converts the plant 24 V DC main supply into a stabilized 5 V DC supply for the HIMA PES H51q safety system, feeding the central unit, I/O circuits and rack backplane. It provides safe isolation between the 24 V DC input and the 5 V DC output, and integrates overvoltage protection, current limitation and a short-circuit-proof output. The F7133 can be configured in redundant parallel operation to support high-availability safety cabinets.

1️⃣Product Identification

• Model: F7133
• Type: DC/DC converter power supply module
• Input: 24 V DC
• Output: 5 V DC
• Target System: HIMA PES H51q
• Manufacturer: HIMA Paul Hildebrandt GmbH + Co KG, Brühl, Germany

2️⃣Technical Specifications

• Input Voltage: 24 V DC, −15 % … +20 %, ripple rpp < 15 %
• Primary Fuse: 6.3 A, slow-blow
• Output Voltage: 5 V DC ±0.5 V, steplessly adjustable
• Factory Setting: 5.4 V DC ±0.025 V
• Rated Output Current: 10 A at factory setting
• Current Limitation: approx. 13 A
• Overvoltage Protection: set to 6.5 V ±0.5 V
• Efficiency: ≥77 %
• EMC: Interference limit class B per VDE 0871 / 0877
• Space Requirement: 8 TE
• Isolation: Safe isolation between input and output voltage
• Output: Short-circuit proof

3️⃣Key Features

• DC/DC conversion with safe galvanic isolation between input and output
• Front-panel potentiometer for stepless output voltage adjustment, with a test socket for voltage measurement
• Overvoltage protection and current limitation; short-circuit-proof output
• Suitable for redundant parallel use; output voltages of the two modules must differ by no more than 0.025 V to avoid unbalanced load
• Compact 8 TE rack-space design for HIMA PES H51q power supply slots

4️⃣Application Fields

• Power supply for the HIMA PES H51q central controller and I/O racks
• Conversion of plant 24 V DC to the regulated 5 V DC system rail in safety PLC cabinets
• Redundant, isolated DC power distribution in ESD / SIS cabinets for oil and gas and chemical plants
• Protected 5 V DC supply for safety-related automation electronics in industrial control cabinets

5️⃣Installation and Setup Notes

• Mount the F7133 in the designated power supply slot of the H51q rack; the module requires 8 TE of rack space
• Confirm the 24 V DC input remains within −15 % … +20 % with ripple below 15 % rpp
• Use the front-panel potentiometer and test socket to set and verify the output voltage before connecting loads
• In redundant configurations, match the two F7133 output voltages to within 0.025 V
• Check the 6.3 A slow-blow primary fuse and run a functional test before energizing the central unit

6️⃣FAQ

Q: What does the HIMA F7133 do? A: It is a DC/DC converter that converts 24 V DC plant power into regulated 5 V DC for the HIMA PES H51q system, with safe isolation, overvoltage protection and current limitation.

Q: What are the F7133 output voltage and current ratings? A: The output is 5 V DC ±0.5 V, steplessly adjustable (factory preset 5.4 V DC ±0.025 V), rated at 10 A, with current limited at approx. 13 A.

Q: Can two F7133 modules be used in parallel? A: Yes. For redundant use, their output voltages must be matched to within 0.025 V to avoid unbalanced load; the output is short-circuit proof.

Q: Is the F7133 an AC power supply? A: No. It is a DC/DC converter with a 24 V DC input and a 5 V DC output; AC mains must not be connected directly to it.