TRICONEX IMFF4703X Fiber to Fiber IO Bus Interface
Brand: Triconex
Model: IMFF 4703X
Product Type: Fiber-to-Fiber I/O Bus Interface Module (IMFF)
System: Tricon CX
Bus: TMR I/O bus, optical fiber link
Maximum Distance: 43.5 mi (70 km)
Optical Transceivers: SFP pluggables, selected and procured by the customer
Companion Module: 4701X IMSS, serial RS-485, up to 100 ft (30 m)
The IMFF is the fiber version of the interface module used to connect the Tricon CX I/O bus between chassis. Where the IMSS module carries the bus over a short serial RS-485 link limited to about 100 ft (30 m), the IMFF converts the bus to an optical link and extends it to a distance measured in kilometers, so an expansion chassis can be placed in a remote rack room, a satellite instrument house or a field cabinet instead of in the same room as the main chassis.
Because the transmission medium is optical fiber, the link is galvanically isolated from the plant electrical environment: earth loops between buildings, surges induced on long copper runs and the electromagnetic noise around large motors, transformers and variable-speed drives do not reach the I/O bus. The module is used in pairs, one on the local side of the link and one on the remote side, and a Tricon CX system can be configured with redundant fiber paths so that a single cable or interface module fault does not break the connection between the main processors and the remote I/O.
The optical transceivers are not fixed by the module: the customer selects and procures the SFP pluggables that match the required distance and fiber type, which is why the module is ordered on its own and the optics are specified separately. The SFP requirements are defined in the Tricon CX Addendum to Tricon User Guides, together with the cable and connection rules for the I/O bus.
The IMFF is used wherever a Tricon CX system needs distributed I/O over long distances — remote wellhead and pipeline stations, tank farms, compressor houses, offshore platforms and large process units where the I/O racks sit in the field but the controllers remain in the central control room.
![]()
العلامة التجارية: Triconex
الطراز: IMFF 4703X
نوع المنتج: وحدة واجهة ناقل إدخال/إخراج من الألياف إلى الألياف (IMFF)
النظام: Tricon CX
الناقل: ناقل الإدخال/الإخراج TMR عبر وصلة ألياف بصرية
أقصى مسافة: 43.5 ميل (70 كم)
المرسلات/المستقبلات البصرية: وحدات SFP قابلة للتركيب، يختارها العميل ويوفرها
الوحدة المرافقة: 4701X IMSS، وصلة RS-485 تسلسلية حتى 100 قدم (30 م)
الوحدة IMFF هي النسخة الليفية من وحدة الواجهة المستخدمة لربط ناقل إدخال/إخراج نظام Tricon CX بين الهياكل. فبينما تنقل وحدة IMSS الناقل عبر وصلة RS-485 تسلسلية قصيرة لا تتجاوز نحو 100 قدم (30 م)، تحوّل الوحدة IMFF الناقل إلى وصلة بصرية وتمددها لمسافة تُقاس بالكيلومترات، بحيث يمكن وضع هيكل التوسعة في غرفة رفوف بعيدة أو في كوخ أجهزة منفصل أو في خزانة ميدانية بدلًا من وضعه في الغرفة نفسها مع الهيكل الرئيسي.
ولأن وسط النقل هو الألياف البصرية، تكون الوصلة معزولة كلفانيًا عن البيئة الكهربائية للمصنع: فلا تصل إلى ناقل الإدخال/الإخراج حلقات الأرضي بين المباني، ولا نبضات الجهد المستحثة على مسارات النحاس الطويلة، ولا الضوضاء الكهرومغناطيسية المحيطة بالمحركات الكبيرة والمحولات ومحركات السرعة المتغيرة. وتُستخدم الوحدة في أزواج، واحدة على الطرف المحلي للوصلة وأخرى على الطرف البعيد، ويمكن إعداد نظام Tricon CX بمسارات ليفية مكررة بحيث لا يؤدي عطل كابل واحد أو وحدة واجهة واحدة إلى قطع الاتصال بين المعالجات الرئيسية والإدخال/الإخراج البعيد.
ولا تكون المرسلات/المستقبلات البصرية محددة سلفًا ضمن الوحدة: إذ يختار العميل وحدات SFP القابلة للتركيب المطابقة للمسافة المطلوبة ونوع الألياف ويوفرها بنفسه، ولهذا تُطلب الوحدة بشكلها الأساسي وتُحدد البصريات بشكل منفصل. وتُعرَّف متطلبات SFP في ملحق Tricon CX لدليل مستخدم Tricon، إلى جانب قواعد الكابلات والتوصيل لناقل الإدخال/الإخراج.
تُستخدم الوحدة IMFF حيثما احتاج نظام Tricon CX إلى إدخال/إخراج موزع على مسافات طويلة: محطات الآبار وخطوط الأنابيب البعيدة، وحقول الخزانات، ومباني الضواغط، والمنصات البحرية، ووحدات العمليات الكبيرة التي توضع فيها رفوف الإدخال/الإخراج في الميدان بينما تبقى وحدات التحكم في غرفة التحكم المركزية.
Marca: Triconex
Número de Pieza: 2000418
Tipo de Producto: Conjunto de Placa de Comunicación
Nivel de Artículo: Conjunto a nivel de placa
El 2000418 se identifica como un conjunto de comunicación a nivel de placa. Se trata de la placa de circuito impreso utilizada dentro de un producto de comunicación Triconex, no del número de modelo del módulo frontal que aparece en una ranura del chasis, por lo que la identificación y el pedido se realizan por número de conjunto y revisión.
En un sistema instrumentado de seguridad, la placa de comunicación es la parte que transporta el enlace entre el controlador y el exterior: la estación de ingeniería, los maestros y esclavos Modbus y los sistemas host que leen y escriben datos del controlador. La sustitución a nivel de placa se utiliza cuando la circuitería de interfaz está defectuosa y el conjunto mecánico, los conectores y la codificación de ranura siguen siendo utilizables.
Company Overview
Main Products
We specialize in supplying original imported spare parts for DCS, PLC, robotics, and large servo systems from leading global brands, including:
- FOXBORO | EMERSON | TRICONEX | XYCOM | BENTLY
- ROCKWELL | ABB | GE | Aen-Brady | YOKOGAWA
- HONEYWELL | RELIANCE | SCHNEIDER | MODICON
- Westinghouse | WOODWARD | Motorola | Rexroth | SEW
☀️Tiana Lai(Sales Director)
?Email: ydf8801@163.com
?️Ship to you via DHL/TNT/UPS/EMS/Fedex
?Product Condition: One-year warranty
Contact us immediately to embark on a new experience of efficient procurement! ✨












There are no reviews yet.