Call us 24/7+86 18250705533

ABB SD802F AC 800F Redundant 24 VDC Power Supply

In stock

ABB SD802F is the redundant 24 V DC power supply module of the AC 800F controller, taking two independent 24 V DC feeds (19.2–32.5 V DC) and switching between them automatically. It generates the 3.3 V and 5 V rails at 5 A each for 26.5 W, holds output for more than 20 ms after a supply failure, and carries reverse polarity protection plus over-current and short-circuit protection. Fitted in the leftmost P slot with a 9-pin diagnostic port and the controller’s Run/Stop, Prim/Sec and Reset controls on its front.


•Manager: Tiana Lai

•E-mail: ydf8801@163.com

•Ship to you via Fedex/DHL/TNT/UPS/EMS

•Package: Original packing with cartons

SKU: 6125637-1-1-1-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1
wechatPhone +8618250705533
Phone: +86 18250705533
Email: sales5@xrjdcs.com
connect:Jinny
Image 2

ABB SD802F AC 800F Redundant 24 VDC Power Supply

The ABB SD802F is the 24 V DC power supply module of the AC 800F controller. It takes two independent 24 V DC inputs, switches between them automatically, and generates the 3.3 V DC and 5.0 V DC rails that feed the controller’s CPU board and its E1/E2 and F1–F4 slots. The module occupies the leftmost P slot of the AC 800F and carries the controller’s basic operating buttons and status indicator on its front. Because the two inputs are both live and self-switching, a loss on one feed leaves the controller running on the other.

Key Specifications

  • Manufacturer: ABB
  • Model: SD802F
  • Ordering Code: 3BDH000012R1
  • Product Type: Power supply module for the AC 800F controller
  • Input: Dual 24 V DC, range 19.2–32.5 V DC
  • Input Ripple: 14 % peak-to-peak permitted
  • Input Source: Can be fed from a three-phase bridge rectifier
  • Input Redundancy: Two inputs, automatic switchover
  • Reverse Polarity Protection: Provided
  • Output Voltage: 3.3 V DC ± 3 %, 5.0 V DC ± 3 %
  • Output Current: 0.5–5 A on 3.3 V, 0.5–5 A on 5.0 V
  • Total Output Power: 26.5 W maximum
  • Current Limit: Approximately 6 A
  • Rated Input Power: 31 W
  • Efficiency: 86 %
  • Heat Dissipation at Normal Load: 5 W
  • Inrush Current: Up to 15 times normal current peak
  • Hold-up on Power Failure: >20 ms
  • Isolation: No galvanic isolation between input and output
  • Output Safety: SELV
  • Test Voltage: 3.3 kV DC
  • Diagnostic Port: 9-pin D-sub, male, with +5 V / 100 mA output and TxD/RxD
  • Backplane Connector: 96-pin module/CPU board connector
  • Slot: Leftmost P slot of the AC 800F
  • Front Indicator: Green “power” LED for internal supply voltage normal
  • Front Controls: Run/Stop, Toggle Prim/Sec (redundancy switchover), Reset

Key Features

  • Two 24 V DC Inputs with Automatic Switchover: Both feeds stay connected and the module moves to the healthy one without operator action, which is what makes the redundant DC arrangement work in a control cabinet.
  • Wide DC Input Window: Accepts 19.2–32.5 V DC with 14 % ripple, so it runs from a battery plant or a rectified three-phase supply without a separate regulator stage.
  • 3.3 V and 5 V Rails at 26.5 W: Supplies both internal rails the AC 800F needs, 5 A on each, covering the CPU board and the module slots.
  • Hold-up Beyond 20 ms: Output is maintained for more than 20 ms after a supply failure, which rides through short dips on the DC plant.
  • Protection Chain: Reverse polarity protection on the inputs, over-current detection and short-circuit protection with a current limit of about 6 A, plus input and output voltage monitoring that reports a power failure signal.
  • Diagnostic Port: A 9-pin D-sub with serial TxD/RxD and a +5 V / 100 mA auxiliary output gives access to the module’s diagnostic data.
  • Controller Controls on the Front: The module carries the Run/Stop switch, the Prim/Sec redundancy toggle and the Reset button, so the controller is operated from the power supply face.
  • SELV Outputs: The output side is SELV, and the module is designed to sit in the P slot at the left of the rack.

Typical Applications

  • AC 800F controller racks in Freelance system cabinets
  • Redundant 24 V DC station supplies fed from battery plants or rectifier banks
  • Process and power plant control rooms running Freelance automation
  • Replacement of a failed supply module in an existing AC 800F rack
  • Spare-part stocking for AC 800F installations

ABB SD802F AC 800F Redundant 24 VDC Power Supply ABB SD802F AC 800F Redundant 24 VDC Power Supply ABB SD802F AC 800F Redundant 24 VDC Power Supply


Company Overview

Main Products

We specialize in supplying original imported spare parts for DCS, PLC, robotics, and large servo systems from leading global brands, including:

  • FOXBORO | EMERSON | TRICONEX | XYCOM | BENTLY
  • ROCKWELL | ABB | GE | Aen-Brady | YOKOGAWA
  • HONEYWELL | RELIANCE | SCHNEIDER | MODICON
  • Westinghouse | WOODWARD | Motorola | Rexroth | SEW

 

☀️Tiana Lai(Sales Director)

?Email: ydf8801@163.com

?️Ship to you via DHL/TNT/UPS/EMS/Fedex

?Product Condition: One-year warranty

 

Contact us immediately to embark on a new experience of efficient procurement! ✨




    Customers reviews

    There are no reviews yet.

    Be the first to review “ABB SD802F AC 800F Redundant 24 VDC Power Supply”

    Your email address will not be published. Required fields are marked *

    Search for products

    Back to Top
    Product has been added to your cart
    phone: +86 18250705533
    to whats
    +8618250705533
    to whats
    +8618250705533
    email: sales5@xrjdcs.com