GE 531X304IBDAMG1 Drive Interface Control Board

In stock

The GE 531X304IBDAMG1 is the YDIA (Discrete Input) I/O Pack for the Speedtronic Mark VIe / Mark VIeS turbine control platform. It provides the electrical interface between the dual-redundant IONet Ethernet control network and a compatible discrete-contact terminal board (STCI / TBCI / TBDI class), acquiring 24 dry-contact / discrete status inputs from field devices and publishing them to the Mark VIe controllers for permissive logic, trip supervision, and SOE logging.

Tags: 57C332A, 57C332A Motor, RELIANCE, RELIANCE Industrial

SKU: 3424044-1-1-1-1-1-1-1-1-1-1-1-1-1

1️⃣Key Specifications

Specification	Detail
Brand	GE
Model	531X304IBDAMG1
Platform	Mark VIe / Mark VIeS Functional Safety
Type	Discrete Contact Input I/O Pack
Channels	24 discrete / dry-contact inputs
Field Voltages	24 VDC, 48 VDC, or 125 VDC (terminal-board dependent)
Isolation	1500 V optical, field-to-logic (inputs not isolated from each other)
Input Threshold	50 % of wetting voltage, clamped 13 % min; under-voltage alarm < 40 % nominal
Filtering	Hardware filter + hysteresis (4 ms typical, variant-dependent)
SOE	1 ms timestamping over IONet (system-dependent)
Network	Dual RJ-45 IONet (10/100 Mbps, R/S/T fabric)
Terminal Board I/F	DC-37 pin to STCI/TBCI/TBDI boards
Power	24/28 VDC via 3-pin connector, typ. ≤ 6.8 W
Redundancy	Simplex / Dual / TMR (1, 2, or 3 packs per signal path)
Indicators	Per-channel yellow LED + PWR / ENET1 / ENET2 / ATTN
Coating	S-style conformal (humidity/salt/fungus resistant)
Temp	-40 to +70 °C operating; -40 to +85 °C storage
Config Tool	ToolboxST / ControlST V06.01+
Safety	SIL 2 / SIL 3 capable in Mark VIeS; ATEX Zone 2 / Class I Div 2 (S1B rev)

2️⃣Core Features

24-channel contact acquisition with per-point LED and hysteresis
1500 V opto-isolation per channel to logic side
Adaptive wetting-voltage threshold + under-voltage annunciation
Automatic 4 s optocoupler continuity self-test
Dual IONet ports for redundant controller fabric
Direct mount on Mark VIeS terminal board via DC-37; no ribbon cable
Simplex / dual / TMR voting done in controller, pack is stateless I/O endpoint
S-conformal coating for turbine-hut / offshore environments

3️⃣Typical Applications

Gas / steam turbine permissive & trip contact input (lube oil, overspeed, flame, breaker aux)
Mark VIeS safety shutdown logic (SIS layer of turbine protection)
Compressor train interlock acquisition
Hydro governor gate-position contacts
Retrofit of Mark V → Mark VIe I/O packs where STCI/TBCI boards retained

GE 531X304IBDAMG1 Drive Interface Control Board