Call us 24/7+86 18250705533

GE IC698PSA100E RX7i Power Supply Module

In stock

GE IC698PSA100E is the 100 W power supply for the PACSystems RX7i controller, delivering +5 V/20 A, +12 V/2 A, and -12 V/1 A from 85–264 VAC or 100–150 VDC input. Convection-cooled at full rating from 0–60°C, with overcurrent, overvoltage, and overtemperature protection plus power factor correction. Plugs into slot 0 of the RX7i main rack.

SKU: 6125637-1-1-1-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1
wechatPhone +8618250705533
Phone: +86 18250705533
Email: sales5@xrjdcs.com
connect:Jinny
Image 2

🔷Product Overview

The GE IC698PSA100E is the 100 W power supply module for the PACSystems RX7i controller, providing +5 V, +12 V, and -12 V rails to the RX7i VME backplane. It plugs into slot 0 of the RX7i main rack, operates from 85–264 VAC (or 100–150 VDC) input, and delivers full 100 W output from 0 to 60°C with only convection cooling. With electronic overcurrent, overvoltage, and overtemperature protection plus power factor correction, it is the standard supply for installed RX7i racks.

🔷Key Specifications

Parameter Specification
Manufacturer GE
Model / Part Number IC698PSA100E
Product Family PACSystems RX7i
Product Type Power Supply Module (low capacity, 100 W)
Input Voltage 85–264 VAC, 47–63 Hz; 100–150 VDC
Total Output 100 W
+5 VDC Output Up to 20 A
+12 VDC Output Up to 2 A
-12 VDC Output Up to 1 A
Cooling Convection only (no forced air required) at 0–60°C
Protection Electronic short-circuit/overcurrent limit, overvoltage latch (15% threshold), overtemperature shutdown
Hold-Up Rides through loss of up to one AC input line cycle
ACFAIL# Signal Asserted at least 5 ms before outputs fall out of specification
Fuses 4 A / 250 V (B and later revisions use 5 × 20 mm fuses)
Connector PICMG 2.11 standard, plug-in to slot 0
Front Panel FIELD OK and OUTPUT OK LEDs; logic-level ON/OFF switch (outputs only)
Field Wiring AWG #16 copper, 75°C rated; terminals accept up to AWG #12
Power Factor Correction Yes (AC operation)

🔷Key Features

  • Three Regulated Outputs: +5 V/20 A, +12 V/2 A, -12 V/1 A from a single 100 W supply.
  • Convection-Cooled at Full Rating: Delivers full 100 W at 0–60°C without a fan tray.
  • Comprehensive Protection: Electronic current limiting per output, overvoltage latch-off, and automatic-recovery overtemperature shutdown.
  • AC Line Ride-Through: Maintains output through one lost AC cycle; ACFAIL# warns the system 5 ms before output loss.
  • Power Factor Correction: Meets AC power quality requirements.

🔷Typical Applications

  • RX7i controller racks in process and factory automation
  • Powering RX7i CPU and I/O modules from 120/240 VAC or 125 VDC plant supplies
  • Spare-part supply for installed GE Fanuc PACSystems RX7i systems

GE IC698PSA100E RX7i Power Supply Module GE IC698PSA100E RX7i Power Supply Module GE IC698PSA100E RX7i Power Supply Module




    Customers reviews

    There are no reviews yet.

    Be the first to review “GE IC698PSA100E RX7i Power Supply Module”

    Your email address will not be published. Required fields are marked *

    Search for products

    Back to Top
    Product has been added to your cart
    phone: +86 18250705533
    to whats
    +8618250705533
    to whats
    +8618250705533
    email: sales5@xrjdcs.com