GE IS200EPSMG1AED Exciter Power Supply Module
Overview
The IS200EPSMG1AED is an Exciter Power Supply Module, board type IS200EPSMG1A, Group 1, used in the GE EX2100 Excitation Control System. It takes 125 V dc from the Exciter Power Distribution Module and generates the regulated logic, analog and auxiliary voltages that the excitation controllers and their terminal boards need. The board works in two stages: a buck regulator first produces a 50 V dc intermediate voltage, and a push-pull inverter then generates the multiple outputs, with the inverter transformer providing high-voltage isolation between the incoming source and the control system.
Product Identification
- Assembly code: IS200EPSMG1AED
- Board type: IS200EPSMG1A, Exciter Power Supply Module, Group 1
- System: GE EX2100 Excitation Control System
- Function: dc to dc power supply board for the excitation control backplane
- Mounting: IS200EPBPG_A Exciter Power Backplane, located below the IS200EBKPG_A Exciter Backplane in the control cabinet
Key Features
- Single 125 V dc input converted into ten distributed voltages for excitation control
- Two-stage architecture, buck regulator plus push-pull inverter, with transformer isolation
- 8 A available on the 5 V logic rail, the heaviest load of the board
- Isolated 70 V dc contact wetting supply for the terminal boards
- Per-output fusing and per-output LED indication for fast fault localisation
- Thirteen test points for measuring each rail against its own common
- Designed for the EPBP backplane in the M1, M2 or C section, matching the triple redundant controller structure of the EX2100
Application Fields
- Static excitation systems for synchronous generators in power plants
- EX2100 excitation control cabinets, including simplex and redundant configurations
- Replacement of failed supply boards in M1, M2 or C controller sections
- Power plant maintenance and retrofit projects keeping existing EX2100 architecture
- Excitation systems on synchronous condensers and large industrial drives
FAQ
Q: What is the IS200EPSMG1AED? A: It is the Group 1 Exciter Power Supply Module of the GE EX2100 excitation control system, board type IS200EPSMG1A, which converts 125 V dc from the EPDM into the control voltages used by the excitation controllers and terminal boards.
Q: Which voltages does it produce? A: 5 V dc at up to 8 A, ±15 V dc at 1 A each, 24 V dc rails at 1.5 to 2 A, isolated 70 V dc for contact wetting, plus 55 V dc rails and a 20 V ac rms 25 kHz output used in regulator applications.
Q: How many boards does an EX2100 need? A: Three independent Group 1 modules, one feeding each of the controllers M1, M2 and C in redundant systems; a simplex exciter uses the M1 section only.
Q: What is the difference between the Group 1 and Group 2 versions? A: Group 1 serves the excitation control system and has no daughter board. Group 2 serves the regulator control and carries the IS200EPSDG_A daughter board, which raises the creep and clearance for the higher dc link input and adds a fuse between the dc link and the buck regulator.
Q: How do I check an output quickly? A: Use the thirteen test points with the correct common, PCOM for the 24 V and 55 V rails, DCOM for 5 V, ACOM for ±15 V and ICOM for the isolated 70 V rail, and compare against the voltage window for that rail.













There are no reviews yet.