HONEYWELL PGR-4C-E General Purpose Relay
Product Overview
The Honeywell PGR-4C-E is the standard socket of the PGR series, the base that carries a Honeywell GR-series miniature relay with four changeover contacts into a control panel. It holds the relay’s four-pole pin pattern, brings the coil and contact circuits out to screw terminals, and protects the terminal area against finger contact. The socket is rated for loads of up to 10 A at 300 V and is built to CE and RoHS requirements.
Key Specifications
- Manufacturer: Honeywell
- Model: PGR-4C-E
- Product Type: Standard relay socket (base) for the GR-series miniature relay
- Contact Configuration Supported: 4 changeover (4CO)
- Compatible Relay: GR-4C
- Rated Load: 10 A, 300 V
- Dielectric Strength: 2500 V
- Screw Torque: 1.0 Nm
- External Wire Range: 20–14 AWG / 0.5–2.5 mm²
- Ambient Temperature: -55 °C to +85 °C
- Weight: 57 g
- Terminal Protection: Finger-safe
- Compliance: CE, RoHS
- Accessory: AGR-V2
Key Features
- Socket for the 4CO GR Relay: Takes the GR-4C miniature relay and brings its four changeover contacts out to field wiring, so the relay is replaced without disturbing the panel wiring.
- 10 A at 300 V Rating: Carries high-current switching through the socket terminals, sized for general-purpose control duties.
- Finger-Safe Terminals: The terminal area is protected against accidental finger contact where the socket is wired at mains potential.
- Screw Terminals with Defined Torque: Terminations are made with screws at a specified 1.0 Nm, giving a repeatable connection on 0.5–2.5 mm² wire.
- Wide Temperature Range: Rated from -55 °C to +85 °C for cabinets that run hot or sit in cold enclosures.
- Compact Footprint: Built to a compact size for a four-pole relay, keeping panel density high.
- Accessory Compatibility: Takes the AGR-V2 accessory on the same base.
Typical Applications
- Machine and panel control circuits using GR-series miniature relays
- Interposing and isolation duties in industrial cabinets
- Replacement of a damaged socket under an existing GR-4C relay
- Spare-part stocking for panels built around the Honeywell PGR/GR range













There are no reviews yet.